| Customization: | Available |
|---|---|
| Cooling Method: | Air Cooling |
| Frequency Band: | High Frequency |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PowerCut Max-400HPR CNC Plasma Cutter 3PH-380V 50/60Hz Cut/Grid/Marking/Gouge 100%
Key features:
Max-400HPR is a multi-air source (air/oxygen nitrogen) fine plasma cutting machine, the cutting section is smoother, the cutting speed is high, and the verticality is better. It can not only be used for hand-held cutting, but also suitable for automatic cutting systems such as CNC cutting machines and robots, with digital communication and analog interfaces, to meet the communication needs of most automation equipment.--HPR260 accessories can be used.
Equipped with a gas operating table, the ion gas and shielding gas are adjusted independently, which improves the cutting fineness and adapts to the high-quality cutting of a variety of gas cutting processes
Derived from the core of the fine plasma cutting machine, the cutting quality is better than that of ordinary plasma cutting machines
The independent high-frequency arc starting controller reduces the interference of high frequency to the CNC and robot system, shortens the torch cable, improves the cooling effect of the cutting torch, and improves the reliability of arc starting
The tailor-made torch cooling system is equipped with a large flow, high-lift water pump and high-power heat dissipation structure, which effectively prolongs the service life of the torch consumables
Rigorous air control logic, especially suitable for "oxygen ion gas/air shielding gas" cutting carbon steel, higher quality than ordinary air plasma cutting, with MS-260 torch
With analog and RS485 digital communication interface, it is easy to expand the function and easy to match with a variety of intelligent CNC systems
It has a rich secondary menu function and monitoring and control functions.
| MAX-400HPR Precision Plasma Cutter | |
| Standard Voltage: 3PH-380V | |
| Technical Specifications | Value/Description |
| Cutting Performance | |
| 30mm Carbon Steel Cutting Example | 1200mm/min (reference) |
| Quality Piercing Cut (Carbon Steel) | 3-45mm thickness |
| Quality Edge Cut (Carbon Steel) | 3-50mm thickness |
| Severance Capacity (Carbon Steel) | 3-120mm thickness |
| Electrical Parameters | |
| Input Power | 95KVA |
| Rated Duty Cycle | 100% @ 40°C |
| Output Current Range | 30-400A |
| Technical Features | |
| Pilot Arc Method | Non-contact |
| Gas Pressure | 0.5-0.8MPa |
| Torch Cooling | Air(30-120A)/Water(30-400A) |
| Power Supply Cooling | Air cooling |
| Physical Specifications | |
| Dimensions (LWH) | 1220*730*1500mm |
| Pilot Arc Box | 40*240*250mm |
| Gas Control Console | 471*410*380mm |
| Package Dimensions (Wooden Case) | - |
| Net Weight | 210kg |
| Model Number | MAX-400HPR |
| Cutting Gas | Air/Oxygen/Nitrogen |
| CNC Accessories Package | |
| Component | Qty |
| Arc Voltage Plug P25-2 | 1 |
| Control Plug P20-2 | 1 |
| Pilot Arc Success Plug P16-2 | 1 |
| Corner Signal Plug P16-3 | 1 |
| Water Tank Plug P20-3 | None |
| Air Inlet Connector (8mm) | 1 |
| Water Inlet Connector M16 | 2 |
| Connector Covers | 4 |
| Grounding Cable | 1m |
| Hose Clamps | 2 |
| Consumables (Torch) | 4 sets electrodes, 1 shield cap |
| Fuses | 4 |
| Documentation | |
| Item | Qty/Unit |
| Manual (Digital) | 1 set |
| Warranty Card | 1 set |
| Certificate of Compliance | 1 set |
| Main Components | |
| Item | Qty/Unit |
| Power Input Terminals | 3 (in power box) |
| Pilot Arc Box | 1 unit |
| Gas Control Console | 1 unit |
| Main Unit | 1 unit |
| Water Tank MSW-20L (High-speed) | Built-in |
){kind=link}